Music production session manager https://www.laborejo.org
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 

482 lines
25 KiB

:Author: Laborejo Software Suite
:Version: 0.1
:iconfont-remote!:
:!webfonts:
////
This documentation is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.
To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/4.0/ or send a
letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.
A copy of the license has been provided in the file documentation/LICENSE.
////
////
https://powerman.name/doc/asciidoc
https://asciidoctor.org/docs/user-manual/
////
:sectnums:
:toc: left
:toc-title: Table of Contents
:toclevels: 3
= Argodejo
// Don't write in the empty line above line. It will be interpreted as author html tag
For program version 0.1
== Introduction
Argodejo (Esperanto: 'place to set things up') is a music production session manager.
It is used to start your programs, remember their (JACK) interconnections and make your life easier
in general.
You can seamlessly change between two view modes to quickly start a few programs or have complete
control and a detailed overview.
Argodejo does not re-invent the wheel but instead uses the New-Session-Manager daemon and enhances
it with some tricks of its own, that always remain 100% compatible with the original sessions.
This is a proof of concept version. It aims to show that session management with NSM can be quick
and convenient and make the user feel in control. Some functionality has not yet been
implemented, most prominently anything related to NSM over network. There is always the possibility to
break things when trying out corner cases and hacks.
That said, for single-computer sessions with just one daemon and one GUI at the same time Argodejo
should provide a good user experience.
== Preamble
Session Management leads to simplification of workflows, overview and control over
programs and data and a good portion of convenience :)
No program exists on its own, because no program can do everything that is necessary for today's
music production.
This is obvious in a JACK environment, which is fundamentally modular: Different
programs fulfill different functions and "talk" to each other by sending data to each other.
A sequencer sends MIDI to a sampler or synthesizer, which is connected to a plug-in host for effects etc.
Even the most monolithic all-in-one DAWs have to, or want to, eventually connect to the outside
world. For example, to connect to a screen recorder or streaming program, include a word processor
for recording order or lyrics, or to use a function that is simply not available in the DAW.
Much of the work is already done by the JACK subsystem. All programs can share their music in
real time, have synchronized timelines and play in the same tempo.
What remains is the tedious work of always starting all programs, loading project files, connecting
audio channels etc. Session management in general (e.g. specifically written starter script files)
and Argodejo in particular do this work for you, or at the very least, greatly simplify it.
In contrast to the self-written script mentioned above, you don't have to decide in advance on a
setup, but everything is saved automatically as long as you manage everything through Argodejo.
=== Example
* Start Argodejo (Start menu, terminal etc.)
* You are now in the "Quick View" to start a session
* Press the big button "Start New Session"
* Now you get a choice of programs:
* A single click with the mouse starts a program
* Another click hides (or subsequently shows) its graphical interface
* If the program crashes you get a warning and can restart it.
* Audio and midi ports can now be connected together in a patchbay. The connections are stored in Argodejo.
* To get more programs and advanced features you can switch to the tab "Full View
* The name of the session so far is simply a date. By clicking on it you can enter a real name. Like "My song"
* If you are finished you can return to the session selection by pressing the button "Save and Close"
* Now Argodejo could be closed itself.
* All stored data is in a single directory on the hard disk (`~/NSM Sessions/My Song`)
* The session can be resumed: After clicking on the name, all programs start automatically and connect their JACK ports to among themselves.
"Quick View" is a good start. However, usually one would like to get into the full view, even if it
is only to start a program twice or to save manually.
== Quick View
The quick view is an environment reduced to the minimum. You, as a user, should have to make as few
decisions as possible and start an old session or create a new one as quickly as possible (with the
at least clicks).
For stability reasons, only programs are shown that are known to
work correctly with Argodejos session management.
The Quick View is only a view. There is no technical difference to the full view and you can switch
back and forth at any time.
=== Selecting a Session
There are only two options here: Click on "Start New Session" to do so, or
select one of the existing sessions to resume it (if available).
=== In a Session
The name can be changed. We recommend a date in the form YYYY-MM-DD followed by a informative name.
Please note that the name change will only take effect (e.g. renaming the session directory on
disk) when you close the session.
Next, a larger text field is available for notes. Write what you want. TODO lists, lyrics, credits
and sources of external samples etc.
Programs are symbolized by icons. A mouse click starts the program (which can take a while, we have
no influence on that). The status of the program is indicated by a symbol: The "Play" symbol for
the running program, the eye means "program window hidden", the "Power On/Off" symbol means that
the program has been terminated (or crashed).
If the program supports it, a running program window can be hidden. Synthesizers, once set up, do
not have to be permanently visible. Just click on the program icon again. Either nothing happens
(the program does not support it) or the window will hide. Another click on a hidden window shows
it again. Every program itself is responsible for whether it saves its window state. Also, some
programs already start hidden.
There is *no* way to end or remove a program in this view. To do this, switch to the full view or
use the close function of the program itself.
There is also *no* possibility to start a program multiple times, e.g. one synthesizer per
track. If you want to start multiple program instances through the full view times you can still
use the quick view to manage the general session, but it is not defined which program instance a
click on the icon (e.g. to hide) affects. Multiple instances are a clear indicator that you are
ready for the full view.
As you'll eventually discover, not *all* available programs are in the list, and there there is
also no possibility to start programs that would work well in a session (e.g. a tuner), but are not
explicitly written for it, e.g. do not report their status. It is better to manage these programs
in full view.
If, unfortunately, a program has crashed, you can only restart it and hope its automatic saving
worked. Good luck.
== Full View
Some concepts have already been explained in the chapter "Quick View". It is expected that you have
read this.
=== Selecting a Session
Sessions are displayed as a table, which you sort by clicking on a column header. Here is shown how
the session is called and when it was saved the last time, probably the two most important pieces
of information. Also shown is how many programs/clients are in the session and whether it contains
symbolic links. The latter is probably set to "Yes" if use a sampler, or similar, that contains
large audio files. These are initially only linked into the session, and not copied, to save disk
space. The displayed disk space usage is not the actual one, but includes the sizes of
symlink-targets. Only when you archive the session or replace the links with real files the number
becomes correct.
Finally, the directory in which the files are actually stored is also given.
Sessions represent the directory tree. A session is always a "leaf" and cannot include subsessions.
When creating or renaming sessions, you can also arrange them in the tree by using the usual slash
notation: `song123` -> `New album/song 123` or `Test/asdf` -> `Romantic pop ballads/My heart will
keep beating`. How to organize your sessions and how many subdirectories you create is up to you.
It is, however, not allowed to start the name with `/` or use the special characters `..`. The
tree view can be deactivated by a checkbox on the left side, e.g. to be able to sort them. This is
just a view, your data remains untouched.
Each session has a context menu (e.g. right mouse button) with further options: You can choose to
rename a session, delete it (including all associated files on the hard disk!) and more. These
functions are equivalent to your file manager. If you like, you can also use your file manager to
rename, move, or delete the session directories themselves (unless they are is currently open). You
don't need to restart Argodejo to do this, it will respond to the changes while running.
There is also the possibility to remove a so-called "lock" file. This is a file which is created
when the session starts and deleted when it ends. This tells Argodejo which session is currently
running. If a lock file exists, the session cannot be opened! This should not happen during normal
operation. But if a power failure or similar occurs in the middle of a session, the lock file may
remain, although obviously no session is opened. In this case, unlock the session manually by
deleting the lock file.
Click on "New session" to create one. In contrast to the quick view, you must enter the name
directly . As mentioned above, you can use the directory tree. In addition, there are several
(almost obligatory) programs suggested to start with. Normally one should accept all suggestions.
There is always the option to remove them later.
A double click on an existing session (or the "Load Selected" button) does just that.
=== In a Session
The full view is divided into three areas: Program starter, programs in the current session
and the session notes. There is also a dynamic menu.
On the left side you see the program starter. A double-click starts a program instance in this
session. You can also start a program more than once. For available programs please refer to the
chapter "Program Database".
==== Running Programs
Started programs are located on the right side. A double-click switches the visibility
to hide its window if the program supports it. If not, nothing happens.
The following information is available per program:
* The name (possibly with icon)
* A "label" that programs can use freely (e.g. Fluajho shows the loaded .sf2 here)
* The program status
* Stopped , not running
* Ready, running
* Launch, If the status halts here but the programs works, it is one that does not specifically support session mode. Argodejo cannot know if it is already running or not. Everything is fine! :)
* Other states are only transitions and usually only visible for a very short time, e.g. Open / Loading
* Visibility (A cross for visible, blank for invisible)
* Changes - Are there currently unsaved changes?
* ID - A unique identifier that can be used to distinguish between multiple instances of the same program
All other functions are accessible via the menu or context menu. One click on a program selects it,
and the client menu in the menu bar will now apply to the client. Alternatively, you can
right-click on an entry for a context menu, which is identical to the menu.
In addition to self-explanatory functions there are also:
* Rename gives the program a self-chosen name, mostly to make its purpose clear and to distinguish it better from others. This feature is only available when 'nsm-data' is running in the session.
* Save only tells this program to save
* Remove takes the program out of the session. However, no files are deleted in the process. At the moment you have to "clean up" in your file manager by hand.
If the client "nsm-data" is in the session (this is the default setting) the lower area provides a
large text field for notes. It is the same as in the quick view. Write what you want: TODO lists,
lyrics, credits and sources from external Samples etc.
==== The Session Menu
In contrast to the quick view, full mode offers menus, which can also be accessed via the usual keyboard shortcuts (Ctrl+S for saving etc.).
* Save instructs all programs to save, the session continues to run
* Save and Close ends the session, after all programs saved
* Abort ends the session without saving the programs
* Save As saves the session under a different name and closes the current session without saving. From now on you work under the new name.
* Add Client offers the option to add any program, whether it is in the program database or not.
* Any installed programs are suggested. Argodejo doesn't check them for usefulness for a music session, or even for runnability. You will find `ls` here as well as `argodejo` itself.
== Program-Database
Argodejos launcher is based on a program database, which is partly self-generated, partly
maintained by hand. As in a start menu Argodejo will offer you only programs that are actually
installed on your system.
The database is created at the first start. Depending on your system, this can take some moments to
a few minutes.
If you are reinstalling or uninstalling audio programs, you will need to update the database via
the command in the control menu. Program installations and system changes are even possible while
Argodejo is running (even in a session). After a DB update you can immediately access all new
programs.
If you do not see an installed program in our launcher, but you are sure that it supports session
management please report it to info@laborejo.org or under https://laborejo.org/bugs .
In addition, you can add (in full view) programs that are not in the database.
=== For advanced users
The strict rule is that only programs in the $PATH are included in the database. Absolutel paths
are not allowed, even if you enter the program name yourself through the menu. However sometimes
you just want to try out software, or you are a developer yourself and want to test without
system-wide installation.
In the control menu / settings is a tab "Program-PATH", where you can define and add your own
search paths. One absolute directory path per line, no wildcards, trailing slash don't matter.
For example: `/home/myuser/sources/newsequencer/bin/`
These search paths are not stored in the session, but locally in your `~/.config` directory.
== Tray
Argodejo has a tray icon, if your window manager supports it. A click on the trayicon shows or
hides Argodejo.
If you close Argodejo using the normal window manager function, such as a click on the [X], the
program and the session is not terminated, but minimized to the tray.
A right click on the icon gives you access to common functions:
You can directly start the most recently used sessions.
If a session is already running you can save, cancel etc.
Argodejo can also be completely exited here.
== Network Sessions
The functionality to distribute sessions over the local network is planned for a later program
version.
== Program parameters
As an advanced user, you can start Argodejo in the terminal and add some parameters.. For a
complete list please use the --help parameter.
For example:
* `--session newAlbum/mySong` starts the given session.
* `--continue` starts the last active session.
* `--hide` starts Argodejo as TrayIcon.
* `--url osc.udp://myhost.localdomain:14294/` connects to this server, if available, or starts the internal session server at this address. This is a very technical option and probably not needed.
* `--session-root /home/user/production2030` sets the root directory. Only sessions in this directory are displayed, everything is stored here.
The combination of `--continue` and `--hide` is essentially what many people expect from Session
Management: Resuming at the previous state, without any extra windows in their way.
If your system uses a start menu you will find not only the normal Argodejo starter but also
"Argodejo Continue" to start this mode directly.
== Miscellaneous / Explanations / FAQ
*Session Save and Exit responds slowly*: Argodejo is not a standalone program like an word
processor. The participating programs in the session are not plugins either. When you end the
session a signal is sent to all participating client to save. This may take a few moments where
you are able to see "live" how individual programs terminate and disappear from the session.
Everything is fine.
*I have added a program but it does not save with the session*: Does the program support session
management? If not, Argodejo cannot do much. But you can ask the program developers to contact us
(info@laborejo.org) and we can work together on support.
*The programs hang on exit*: Sorry about that. Actually, the programs themselves are to blame, but
we are also interested in improving the situation by offering at least an emergency solution in the
future.
*Argodejo won't start! I start the program but I can't see anything*: Most likely Argodejo is
running, but invisible, because you exited it from the tray last time. Is it in the tray? A
message should have popped up, maybe you missed it. If there is no tray in your window manager, the
program should always be visible. With all these special window managers in Linux it may be that
the tray detection did not work properly. Contingency plan is to delete
`~/.config/LaborejoSoftwareSuite/argodejo`. This will NOT remove any sessions, but only local
settings such as the visibility of the program window. At next start Argodejo will behave like the
very first start.
*JACK crashed. A lot of programs hang. What can I do to prevent data loss?* Probably already many
programs in the session are not running properly and are not reacting anymore. The best thing to do
is to use the 'Abort Session' function and restart everything. If the data has actually been
unsaved for a long time, you can also dare to save/exit. It may be necessary to re-draw some jack,
or all, jack connections by hand at the next start. If you want to be on the safe side, you can
manually make a copy of the session directory in your file manager before ending the session (with
inevitable crashes).
*A program update broke my session because it can no longer load its files.* Unfortunately, this is
a problem that even Argodejo can't solve. It also happens with LV2 plugins and with all other
software, such as office programs. If you fear that a program becomes incompatible in the future,
write down its version number in the session notes, so that you can at least, in an emergency,
reinstall the old program version (even if this is very is cumbersome).
*What's better? Monolithic DAW or session management?* Why not both? There is no conflict. Session
management is worthwhile with two or more participating programs, which one needs almost always.
You should not feel compelled to suddenly make everything modular with individual programs, only
because you use a session manager. Argodejo is designed to make your music production easier. If it
is faster and more comfortable to manage all plugins and effects e.g. in a single "Carla" instance
then you should do exactly that. If you basically want to do everything in Ardour, do that, but
start Ardour anyway in session management, because no program can do everything alone and the time
will come where you add a second one.
Session management is another level of hierarchy. Sequencers or DAWs are not plug-ins themselves.
Patroneo does not belong "in" Ardour and Ardour does not belong "in" Laborejo. Already in this
example each of the programs fulfils a different role because the others follow a different design
philosophy and cannot ever offer the same workflow. And more:
Some programs can't host plugins, some can't export audio files. They are not bad programs, but
programs that concentrate on one task. Furthermore, there is a lot of software that does not
directly do music production, but still is connected in the grander scheme: Open Broadcast Studio
(OBS), music player, word processors and graphic programs etc.
*Argodejo contains functionality which is not within its scope*: Music production is very complex
and complexity is inevitable. It's like a waterbed: if you press down on one side, something
bounces up in another place. When you create a "clean and lean" program, which therefore implements
only a part of the complete workflow, then the missing part pops up somewhere else. A minimalistic
session manager provokes plug-ins (not LV2), helper-scripts, workarounds and hacks.
E.g. not to include file management provokes user errors like deleting the wrong files. If the SM
knows what to do and it can do it, then let it do it. Or crashes: Technically, crashing programs
are not the "problem" of the session managers, but they are part of the software reality. Crashes
happen every day and need to be handled. Can Argodejo simplify the work and help to restore good
conditions again? Then that should be done. Session management is also an opportunity to simplify
even complex technical scenarios, e.g. distributing sessions over the network.
== Installation and Start
Argodejo is exclusive for Linux. The best way to install is to use your package manager.
If it is not there, or only in an outdated version, please ask your Linux distribution to provide a recent version.
If not available in the package repository you can build Argodejo yourself.
.Build and Install
* Please check the supplied README.md for dependencies.
* You can download a release or clone the git version
** Download the latest version from https://www.laborejo.org/downloads and extract it.
** git clone https://git.laborejo.org/lss/argodejo.git
* Change into the new directory and use these commands:
* `./configure --prefix=/usr`
** The default prefix is /usr/local
* `make`
* `sudo make install`
Now the program is available to run via your menu/launcher or `argodejo` in a terminal.
Please read README.md for other ways of starting argodejo, which are impractical for actual use but can
be helpful for testing and development.
== Help and Development
You can help Argodejo in several ways: Testing and reporting errors, translating, marketing, support, programming and more.
=== Testing and Reporting Errors
If you find a bug in the program (or it runs too slow) please contact us in a way that suits you best.
We are thankful for any help.
.How to contact us
* Report bugs and issues: https://www.laborejo.org/bugs
* Website: https://www.laborejo.org
* E-Mail: info@laborejo.org
* If you see the opportunity and know that a developer will read it also forums, social media etc..
=== Programming
If you want to do some programming and don't know where to start please get in contact with us directly.
The short version is: clone the git, change the code, create a git patch or point me to your public git.
=== Translations
Argodejo is very easy to translate with the help of the Qt-Toolchain, without any need for programming.
The easiest way is to contact the developers and they will setup the new language.
However, here are the complete instructions for doing a translation completely on your own and integrating it into the program.
You can add a new language like this:
* Open a terminal and navigate to qtgui/resources/translations
* Edit the file `config.pro` with a text editor
** Append the name of your language in the last line, in the form `XY.ts`, where XY is the language code.
** Make sure to leave a space between the individual languages entries.
* Run `sh update.sh` in the same directory
** The program has now generated a new `.ts` file in the same directory.
* Start Qt Linguist with `linguist-qt5` (may be named differently) and open your newly generated file
* Select your "Target Language" and use the program to create a translation
* Send us the `.ts` file, such as by e-mail to info@laborejo.org
You can also incorporate the translation into Argodejo for testing purposes. This requires rudimentary Python knowledge.
* Run the "Release" option in QtLinguists "File" menu. It creates a `.qm` file in the same directory as your `.ts` file.
* Edit `qtgui/resources/resources.qrc` and duplicate the line `<file>translations/de.qm</file>` but change it to your new .qm file.
* run `sh buildresources.sh`
* Edit `engine/config.py`: add your language to the line that begins with "supportedLanguages" like this: `{"German": "de.qm", "Esperanto: "eo.qm"}`
** To find out your language string (German, Esperanto etc.) open the `python3` interpreter in a terminal and run the following command:
** `from PyQt5 import QtCore;QtCore.QLocale().languageToString(QtCore.QLocale().language())`
To test the new translation you can either run the program normally, if your system is set to that language. Alternatively start argodejo via the terminal:
* `LANGUAGE=de_DE.UTF-8 ./argodejo -V --save /dev/null`