diff --git a/template/documentation/build.py b/template/documentation/build.py index 4a92c4f..f07fff2 100644 --- a/template/documentation/build.py +++ b/template/documentation/build.py @@ -14,7 +14,7 @@ The correct out/ dir is already part of git. """ -#We still split between template and non-template, eventhough this is not the case in Argodejo. +#We still split between template and non-template, eventhough this is not the case in Agordejo. #However, this enables an easier diff across projects to keep track of changes that we need to do manually here #TODO: Unify in the future by creating calfbox and NSM client as documentation "modules" @@ -110,7 +110,7 @@ https://www.laborejo.org/bugs https://www.laborejo.org/ [examples] -Start {METADATA["shortName"]} through NSM, e.g. through Argodejo. This will take care of all +Start {METADATA["shortName"]} through NSM, e.g. through Agordejo. This will take care of all settings and save directories. Other modes of operations, mostly for testing, are: diff --git a/template/documentation/english.adoc.template b/template/documentation/english.adoc.template index a9a3aed..1813ecd 100644 --- a/template/documentation/english.adoc.template +++ b/template/documentation/english.adoc.template @@ -36,7 +36,7 @@ For program version is exclusive for Linux. The best way to install is to use your package manager. If it is not there, or only in an outdated version, please ask your Linux distribution to provide a recent version. -If available in the package repository, please continue reading directly at "Start from Argodejo / New Session Manager". +If available in the package repository, please continue reading directly at "Start from Agordejo / New Session Manager". If not, you can build yourself. .Build and Install @@ -50,8 +50,8 @@ If not, you can build yourself. * `make` * `sudo make install` -.Start from Argodejo (New Session Manager, NSM) -* Run `argodejo` +.Start from Agordejo (New Session Manager, NSM) +* Run `agordejo` * Press the `New` button, and enter a name for your piece of music. * Use the launcher to add `` to the session. * Add any compatible programs, e.g. synthesizers. diff --git a/template/documentation/german.adoc.template b/template/documentation/german.adoc.template index a597009..5f935b7 100644 --- a/template/documentation/german.adoc.template +++ b/template/documentation/german.adoc.template @@ -36,7 +36,7 @@ Für Programmversion Falls es dort nicht vorhanden ist, oder nur in einer veralteten Version, bitten sie ihre Linuxdistribution bereitzustellen. -Falls in den Paketquellen vorhanden bitte direkt bei " in Argodejo (New Session Manager)" weiterlesen. +Falls in den Paketquellen vorhanden bitte direkt bei " in Agordejo (New Session Manager)" weiterlesen. Falls nicht kann man auch selbst "bauen". .Abhängigkeiten* @@ -50,8 +50,8 @@ Falls nicht kann man auch selbst "bauen". * `make` * `sudo make install` -. im Argodejo (New Session Manager, NSM) starten -* Starten Sie `argodejo` +. im Agordejo (New Session Manager, NSM) starten +* Starten Sie `agordejo` * Erstellen Sie eine neue Session, geben Sie einen Namen für das Musikstück ein. * Benutzen Sie den Launcher um `` hinzuzufügen. * Fügen Sie beliebige kompatible Programme hinzu, z.B. Synthesizer. diff --git a/template/documentation/readme.template b/template/documentation/readme.template index 0852b2d..bdac943 100644 --- a/template/documentation/readme.template +++ b/template/documentation/readme.template @@ -42,7 +42,7 @@ It is possible to clone a git repository. ### Environment: * Jack Audio Connection Kit must be running -* Argodejo / New Session Manager ("NSM") +* Agordejo / New Session Manager ("NSM") ## Build ./configure --prefix=/usr/local @@ -57,15 +57,15 @@ system as you want. We make no distinction if you installed yourself or through the distributions package-manager. -The differences are: With or without Argodejo, with or without sound, installed or from the source dir. +The differences are: With or without Agordejo, with or without sound, installed or from the source dir. -### Installed , running through Argodejo (New Session Manager) (recommended) -Starting through Argodejo after you installed system-wide -is the recommended and only supported way. Start argodejo and load or create a new +### Installed , running through Agordejo (New Session Manager) (recommended) +Starting through Agordejo after you installed system-wide +is the recommended and only supported way. Start agordejo and load or create a new session. Then use the program launcher to add ``. It should appear with an icon in the list and open its GUI. -### Installed without Argodejo +### Installed without Agordejo If you start directly it will present you with a dialog to choose your session directory. You can also start from a terminal (or create a starter script). diff --git a/template/engine/api.py b/template/engine/api.py index ca562b8..5e4a183 100644 --- a/template/engine/api.py +++ b/template/engine/api.py @@ -263,7 +263,8 @@ class Callbacks(object): def _channelChanged(self, channel): """A single channel changed its parameters. The soundfont stays the same.""" exportDict = session.data.exportChannel(channel) - session.data.updateChannelJackMetadaPrettyname(channel) + session.data.updateChannelAudioJackMetadaPrettyname(channel) + session.data.updateChannelMidiInJackMetadaPrettyname(channel) for func in self.channelChanged: func(channel, exportDict) @@ -285,17 +286,13 @@ def startEngine(nsmClient): It gets called by client applications before their own startEngine. Stopping the engine is done via pythons atexit in the session. - - session.eventLoop is overwritten by template.qtgui.mainWindow . It is the first action - it takes after imports. - """ logger.info("Starting template api engine") assert session assert callbacks session.nsmClient = nsmClient - session.eventLoop.directConnect(callbacks._checkPlaybackStatusAndSendSignal) + session.eventLoop.fastConnect(callbacks._checkPlaybackStatusAndSendSignal) session.eventLoop.fastConnect(callbacks._setPlaybackTicks) session.eventLoop.fastConnect(cbox.get_new_events) #global cbox.get_new_events does not eat dynamic midi port events. session.eventLoop.slowConnect(callbacks._checkBBTAndSendSignal) diff --git a/template/engine/input_midi.py b/template/engine/input_midi.py index edfbf30..89621ea 100644 --- a/template/engine/input_midi.py +++ b/template/engine/input_midi.py @@ -33,215 +33,215 @@ from . import pitch class MidiInput(object): """MidiIn provides a port from calfboxes realtime midi in parsing to python data and functions. - Please note that it is not directly related to a track and is not responsible for actual midi + Please note that it is not directly related to a track and is not responsible for actual midi recording. This is the base class if you want to have midi control your program, like controlling a GUI, step entry like in Laborejo or visualizers with multiple tracks. - + You can therefore choose how you interpret the incoming data. It is possible to only have one - midi in port for the whole program and decide where to route the incoming events based on e.g. - GUI status (which track is selected). - - Or you could mirror your internal tracks one by one with a midi input. - - MidiIn is also the base class for instruments. However, these are subclasses. - - It is recommended that you add a MidiIn object to your Python structures. - Don't subclass it because you might want to have MidiOut and audios as well, this + midi in port for the whole program and decide where to route the incoming events based on e.g. + GUI status (which track is selected). + + Or you could mirror your internal tracks one by one with a midi input. + + MidiIn is also the base class for instruments. However, these are subclasses. + + It is recommended that you add a MidiIn object to your Python structures. + Don't subclass it because you might want to have MidiOut and audios as well, this will produce a messy multiple inheritance situation. - + One usecase is Laborejo: A single global step midi input that calls api functions. In this case MidiInput is an alternative to the GUI. It does not belong in the engine but at - lowest in the api. - """ - + lowest in the api. + """ + def __init__(self, session, portName): - """The processor adds itself to the event loop. - You need to call prepareDelete before removing a midi output again""" - + """The processor adds itself to the event loop. + You need to call prepareDelete before removing a midi output again""" + self.session = session self.portName = portName - self.scene = cbox.Document.get_engine().new_scene() - self.scene.clear() + self.scene = cbox.Document.get_engine().new_scene() + self.scene.clear() self.scene.set_enable_default_song_input(False) - self.cboxMidiPortUid = cbox.JackIO.create_midi_input(portName) + self.cboxMidiPortUid = cbox.JackIO.create_midi_input(portName) self.realtimeMidiThroughLayer = self.scene.add_new_midi_layer(self.cboxMidiPortUid) #Create a midi layer for our input port. That layer support manipulation like transpose or channel routing. - cbox.JackIO.set_appsink_for_midi_input(self.cboxMidiPortUid, True) #This sounds like a program wide sink, but it is needed for every port. - cbox.JackIO.route_midi_input(self.cboxMidiPortUid, self.scene.uuid) #Route midi input to the scene. - - self._currentMidiThruOutputMidiPortUid = None #RT midi thru + cbox.JackIO.set_appsink_for_midi_input(self.cboxMidiPortUid, True) #This enables forwarding to Python for our midiProcessors get_new_events(self.parentInput.cboxMidiPortUid) + cbox.JackIO.route_midi_input(self.cboxMidiPortUid, self.scene.uuid) #Route midi input to the scene. Without this we have no sound, but the python processor will still work. + + self._currentMidiThruOutputMidiPortUid = None #RT midi thru self.setMidiThruChannel(1) - + self.midiProcessor = MidiProcessor(parentInput = self) - self.session.eventLoop.fastConnect(self.midiProcessor.processEvents) + self.session.eventLoop.fastConnect(self.midiProcessor.processEvents) self.readyToDelete = False - + def prepareDelete(self): - self.session.eventLoop.fastDisconnect(self.midiProcessor.processEvents) - self.readyToDelete = True - + self.session.eventLoop.fastDisconnect(self.midiProcessor.processEvents) + self.readyToDelete = True + def setMidiThru(self, cboxMidiOutUuid): """ This is the output portion of the program. Everything in init is only for input. - - Instruct the RT part to echo midi in directly to the connect output ports + + Instruct the RT part to echo midi in directly to the connect output ports so we hear the current track with the tracks instrument. - + e.g. if you have a single global midi input but multiple track based outputs you can use this to route the input RT to a track output while still getting the python data to process. - + If you use such a configuration for data entry the user will hear his inputs echoed by the actual target instrument and not e.g. a generic piano or sine wave sound. - """ + """ if not self._currentMidiThruOutputMidiPortUid == cboxMidiOutUuid: #most of the time this stays the same e.g. cursor left/right. we only care about up and down - self._currentMidiThruOutputMidiPortUid = cboxMidiOutUuid - self.realtimeMidiThroughLayer.set_external_output(cboxMidiOutUuid) - + self._currentMidiThruOutputMidiPortUid = cboxMidiOutUuid + self.realtimeMidiThroughLayer.set_external_output(cboxMidiOutUuid) + def setMidiThruChannel(self, channel): if channel < 1 or channel > 16: raise ValueError("Channels are from 1 to 16 (inclusive). You sent " + str(channel)) self.realtimeMidiThroughLayer.set_out_channel(channel) - -class MidiProcessor(object): - """ + +class MidiProcessor(object): + """ There are two principal modes: Step Entry and Live Recording. - + Add your function to callbacks3 for notes and CC or callbacks2 for program change and Channel Pressure. - + self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.NOTE_ON)] = lambda: print(channel, note, velocity)""" - - - SIMPLE_EVENT = "/io/midi/simple_event" + + + SIMPLE_EVENT = "/io/midi/simple_event" TRANSPORT_PLAY = "/io/midi/event_time_ppqn" TRANSPORT_STOPPED = "/io/midi/event_time_samples" M_NOTE_ON = 0x90 - M_NOTE_OFF = 0x80 + M_NOTE_OFF = 0x80 M_ACTIVE_SENSE = 0xFE #254 - + M_AFTERTOUCH = 0xA0 #160 M_CONTROL_CHANGE = 0xB0 #176 M_PROGRAMCHANGE = 0xC0 #192 M_CHANNELPRESSURE = 0xD0 #208 M_PITCHBEND = 0xE0 #224 - + CC_BANKCHANGE_COARSE = 32 - CC_BANKCHANGE_FINE = 0 + CC_BANKCHANGE_FINE = 0 def __init__(self, parentInput): - self.parentInput = parentInput + self.parentInput = parentInput self.callbacks3 = {} #keys are tuples self.callbacks2 = {} #keys are tuples - self.active = True - self.ccState = {} + self.active = True + self.ccState = {} self.lastTimestamp = None #None for Transport not rolling, Value while rolling #for cc in range(128): #0-127 inclusive # self.ccState[cc] = None #start with undefined. - - + + def processEvents(self): """events come in packages. If you press just a key you'll get a list with length 2: timestamp, midi-message For each event received in the same timeslot you'll get two events more. A chord of four keys, played staccato simultaniously will yield 16 events. 2 for each key (=8), times two for note on and note off each.(=16) - + We don't want the whole function too many indentation levels deep so we take a few shortcuts. - + This function gets called very often. So every optimisation is good. - """ - events = cbox.JackIO.get_new_events(self.parentInput.cboxMidiPortUid) + """ + events = cbox.JackIO.get_new_events(self.parentInput.cboxMidiPortUid) if not self.active: return if not events: - return - for message, stuff, dataList in events: - l = len(dataList) - - #Check recording mode. These message only get sent in front of another event, like a note. + return + for message, stuff, dataList in events: + l = len(dataList) + + #Check recording mode. These message only get sent in front of another event, like a note. #That means this is not a playback state detector because it only works after receiving a midi event - if message == MidiProcessor.TRANSPORT_PLAY: - #if self.lastTimestamp is None: + if message == MidiProcessor.TRANSPORT_PLAY: + #if self.lastTimestamp is None: # print ("switching to live recording") self.lastTimestamp = dataList[0] - #print (self.lastTimestamp) - - elif message == MidiProcessor.TRANSPORT_STOPPED : + #print (self.lastTimestamp) + + elif message == MidiProcessor.TRANSPORT_STOPPED : #if not self.lastTimestamp is None: - # print ("switching to step recording") - self.lastTimestamp = None - + # print ("switching to step recording") + self.lastTimestamp = None + #Process Data elif l == 3: #notes and CC if message == MidiProcessor.SIMPLE_EVENT: - m_type, m_note, m_velocity = dataList #of course these can be different than a note, but this is easier to read then "byte 1", "byte 2" + m_type, m_note, m_velocity = dataList #of course these can be different than a note, but this is easier to read then "byte 1", "byte 2" m_channel = m_type & 0x0F - m_mode = m_type & 0xF0 #0x90 note on, 0x80 note off and so on. - key = (message, m_mode) - if m_mode == 0xB0: - self.ccState[m_note] = m_velocity #note is CCn , like 7=Volume, velocity is value. - - if key in self.callbacks3: + m_mode = m_type & 0xF0 #0x90 note on, 0x80 note off and so on. + key = (message, m_mode) + if m_mode == 0xB0: + self.ccState[m_note] = m_velocity #note is CCn , like 7=Volume, velocity is value. + + if key in self.callbacks3: self.callbacks3[key](self.lastTimestamp, m_channel, m_note, m_velocity) - - elif l == 2: #program change, aftertouch, + + elif l == 2: #program change, aftertouch, if message == MidiProcessor.SIMPLE_EVENT: - m_type, m_value = dataList + m_type, m_value = dataList m_channel = m_type & 0x0F - m_mode = m_type & 0xF0 - key = (message, m_mode) - if key in self.callbacks2: + m_mode = m_type & 0xF0 + key = (message, m_mode) + if key in self.callbacks2: self.callbacks2[key](self.lastTimestamp, m_channel, m_value) #Active Sense (Keep Alive Signal) - #TOOD: this can be commented out for performance reasons if we don't need to print out messages for debug reasons. + #TOOD: this can be commented out for performance reasons if we don't need to print out messages for debug reasons. #TODO: Sadly there is no compile time. Use the compiledPrefix instead? - #elif l == 1 and message == MidiProcessor.SIMPLE_EVENT and dataList == [MidiProcessor.M_ACTIVE_SENSE]: - # pass + #elif l == 1 and message == MidiProcessor.SIMPLE_EVENT and dataList == [MidiProcessor.M_ACTIVE_SENSE]: + # pass - #else: + #else: # print (message, stuff, dataList) - - + + #Convenience Functions - def register_NoteOn(self, functionWithFourParametersTimestampChannelNoteVelocity): - """A printer would be: + def register_NoteOn(self, functionWithFourParametersTimestampChannelNoteVelocity): + """A printer would be: lambda timestamp, channel, note, velocity: print(timestamp, channel, note, velocity) - """ + """ self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_NOTE_ON)] = functionWithFourParametersTimestampChannelNoteVelocity - - def register_NoteOff(self, functionWithFourParametersTimestampChannelNoteVelocity): - """A printer would be: + + def register_NoteOff(self, functionWithFourParametersTimestampChannelNoteVelocity): + """A printer would be: lambda timestamp, channel, note, velocity: print(timestamp, channel, note, velocity) - """ + """ self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_NOTE_OFF)] = functionWithFourParametersTimestampChannelNoteVelocity - - def register_PolyphonicAftertouch(self, functionWithFourParametersTimestampChannelTypeValue): + + def register_PolyphonicAftertouch(self, functionWithFourParametersTimestampChannelTypeValue): self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_AFTERTOUCH)] = functionWithFourParametersTimestampChannelTypeValue - - def register_CC(self, functionWithFourParametersTimestampChannelTypeValue): + + def register_CC(self, functionWithFourParametersTimestampChannelTypeValue): self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_CONTROL_CHANGE)] = functionWithFourParametersTimestampChannelTypeValue - - def register_ProgramChange(self, functionWithThreeParametersTimestampChannelValue): - self.callbacks2[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_PROGRAMCHANGE)] = functionWithThreeParametersTimestampChannelValue - - def register_ChannelPressure(self, functionWithThreeParametersTimestampChannelValue): - self.callbacks2[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_CHANNELPRESSURE)] = functionWithThreeParametersTimestampChannelValue - - def register_PitchBend(self, functionWithFourParametersTimestampChannelTypeValue): + + def register_ProgramChange(self, functionWithThreeParametersTimestampChannelValue): + self.callbacks2[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_PROGRAMCHANGE)] = functionWithThreeParametersTimestampChannelValue + + def register_ChannelPressure(self, functionWithThreeParametersTimestampChannelValue): + self.callbacks2[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_CHANNELPRESSURE)] = functionWithThreeParametersTimestampChannelValue + + def register_PitchBend(self, functionWithFourParametersTimestampChannelTypeValue): self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_PITCHBEND)] = functionWithFourParametersTimestampChannelTypeValue #Hier weiter machen. After Touch, aber wie darstellen? Das ist ja per Taste. Wie CC Type? Oder unten im Velocity View? def notePrinter(self, state:bool): if state: - def _printer(timestamp, channel, note, velocity): - print(f"[{timestamp}] Chan: {channel} Note: {pitch.midi_notenames_english[note]}: Vel: {velocity}") + def _printer(timestamp, channel, note, velocity): + print(f"[{timestamp}] Chan: {channel} Note: {pitch.midi_notenames_english[note]}: Vel: {velocity}") self.callbacks3[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_NOTE_ON)] = _printer else: try: del self.callbacks[(MidiProcessor.SIMPLE_EVENT, MidiProcessor.M_NOTE_ON)] except KeyError: pass - + diff --git a/template/engine/sampler_sf2.py b/template/engine/sampler_sf2.py index 087139b..36b8e1c 100644 --- a/template/engine/sampler_sf2.py +++ b/template/engine/sampler_sf2.py @@ -53,13 +53,15 @@ class Sampler_sf2(Data): self.patchlist = {} #bank:{program:name} self.buffer_ignoreProgramChanges = ignoreProgramChanges - self.midiInput = MidiInput(session=parentSession, portName="in") + self.midiInput = MidiInput(session=parentSession, portName="all") + cbox.JackIO.Metadata.set_port_order(f"{cbox.JackIO.status().client_name}:all", 0) #first one. The other port order later start at 1 because we loop 1-based for channels. #Set libfluidsynth! to 16 output pairs. We prepared 32 jack ports in the session start. "soundfont" is our given name, in the line below. This is a prepared config which will be looked up by add_new_instrument cbox.Config.set("instrument:soundfont", "engine", "fluidsynth") cbox.Config.set("instrument:soundfont", "output_pairs", 16) #this is not the same as session.py cbox.Config.set("io", "outputs", METADATA["cboxOutputs"]). It is yet another layer and those two need connections #Create the permanent instrument which loads changing sf2 layer = self.midiInput.scene.add_instrument_layer("soundfont") + self.instrumentLayer = layer self.instrument = layer.get_instrument() self.loadSoundfont(filePath, defaultSoundfont) @@ -98,6 +100,7 @@ class Sampler_sf2(Data): cbox.JackIO.Metadata.set_port_order(portname, channelNumber) except Exception as e: #No Jack Meta Data logger.error(e) + break #Also sort the mixing channels try: @@ -108,7 +111,32 @@ class Sampler_sf2(Data): except Exception as e: #No Jack Meta Data logger.error(e) - + #If demanded create 16 routing midi channels, basically a jack port -> midi channel merger. + if True: + for midiRouterPortNum in range(1,17): + portName = f"channel_{str(midiRouterPortNum).zfill(2)}" + router_cboxMidiPortUid = cbox.JackIO.create_midi_input(portName) + router_scene = cbox.Document.get_engine().new_scene() + router_scene.clear() + router_scene.set_enable_default_song_input(False) + #router_scene.add_instrument_layer("soundfont") #This creates multiple sf2 instances + router_midi_layer = router_scene.add_new_midi_layer(router_cboxMidiPortUid) #Create a midi layer for our input port. That layer supports manipulation like transpose or channel routing. + #cbox.JackIO.route_midi_input(router_cboxMidiPortUid, router_scene.uuid) + router_midi_layer.set_out_channel(midiRouterPortNum) + router_midi_layer.set_in_channel(midiRouterPortNum) + #router_midi_layer.set_enable(False) + + #cbox.JackIO.route_midi_input(router_cboxMidiPortUid, self.midiInput.scene.uuid) #routes directly to the instrument and ignores the layer options like channel forcing + #cbox.JackIO.route_midi_input(router_cboxMidiPortUid, self.midiInput.cboxMidiPortUid) #runs, but does nothing + #cbox.JackIO.route_midi_input(router_midi_layer, self.midiInput.cboxMidiPortUid) #does not run + router_midi_layer.set_external_output(self.midiInput.cboxMidiPortUid) + #router_midi_layer.set_external_output(self.midiInput.scene.uuid) + #Port order + fullPortname = f"{cbox.JackIO.status().client_name}:out_{channelNumber}" + try: + cbox.JackIO.Metadata.set_port_order(fullPortname, midiRouterPortNum) + except Exception as e: #No Jack Meta Data + pass #don't break here. @property def _ignoreProgramChanges(self): @@ -242,8 +270,8 @@ class Sampler_sf2(Data): newValue = program | (bank<<7) self.instrument.engine.set_patch(channel, newValue) #call to cbox - def updateChannelJackMetadaPrettyname(self, channel:int): - """Channels 1-16""" + def updateChannelAudioJackMetadaPrettyname(self, channel:int): + """Audio output channel pairs 1-16""" bank, program, name = self.activePatches()[channel] #activePatches returns a dict, not a list. channel is a 1-based key, not a 0-based index. chanL = channel*2-1 #channel is 1-based. [1]*2-1 = 1. @@ -259,6 +287,19 @@ class Sampler_sf2(Data): except Exception as e: #No Jack Meta Data logger.error(e) + def updateChannelMidiInJackMetadaPrettyname(self, channel:int): + """Midi in single channels 1-16""" + bank, program, name = self.activePatches()[channel] #activePatches returns a dict, not a list. channel is a 1-based key, not a 0-based index. + + portName = f"channel_{str(channel).zfill(2)}" + fullPortname = f"{cbox.JackIO.status().client_name}:{portName}" + + #Use the instrument name as port name: 03-L:Violin + try: + cbox.JackIO.Metadata.set_pretty_name(fullPortname, f"{str(channel).zfill(2)} : {name}") + except Exception as e: #No Jack Meta Data + logger.error(e) + def updateAllChannelJackMetadaPrettyname(self): """Add this to a callback. It can't be run on program startup because sampler_sf2 is @@ -269,7 +310,8 @@ class Sampler_sf2(Data): therefore the place to update is in the API, where the new state is also sent to the UI. """ for channel in range(1,17): - self.updateChannelJackMetadaPrettyname(channel) + self.updateChannelAudioJackMetadaPrettyname(channel) + self.updateChannelMidiInJackMetadaPrettyname(channel) """ for channel, (bank, program, name) in self.activePatches().items(): diff --git a/template/qtgui/chooseSessionDirectory.py b/template/qtgui/chooseSessionDirectory.py index 8ca01fe..c6689b2 100644 --- a/template/qtgui/chooseSessionDirectory.py +++ b/template/qtgui/chooseSessionDirectory.py @@ -66,7 +66,7 @@ class ChooseSessionDirectory(QtWidgets.QDialog): pixmap_scaled = aboutLogoPixmap.scaled(self.ui.goldenratioLabel.size(), QtCore.Qt.KeepAspectRatio) self.ui.goldenratioLabel.setPixmap(pixmap_scaled) - message = QtCore.QCoreApplication.translate("TemplateChooseSessionDirectory", "Please choose a directory for your session files. It is recommended to start through Argodejo/New Session Manager instead.") + message = QtCore.QCoreApplication.translate("TemplateChooseSessionDirectory", "Please choose a directory for your session files. It is recommended to start through Agordejo/New Session Manager instead.") self.ui.label.setText(message) settings = QtCore.QSettings("LaborejoSoftwareSuite", METADATA["shortName"]) diff --git a/template/qtgui/eventloop.py b/template/qtgui/eventloop.py new file mode 100644 index 0000000..25818a9 --- /dev/null +++ b/template/qtgui/eventloop.py @@ -0,0 +1,90 @@ +#! /usr/bin/env python3 +# -*- coding: utf-8 -*- +""" +Copyright 2020, Nils Hilbricht, Germany ( https://www.hilbricht.net ) + +This file is part of the Laborejo Software Suite ( https://www.laborejo.org ), + +This application is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +""" + +import logging; logger = logging.getLogger(__name__); logger.info("import") + +from PyQt5 import QtCore + + +class EventLoop(object): + + def __init__(self): + """The loop for all things GUI and controlling the GUI (e.g. by a control midi in port) + + directConnect is 0ms (see below) + fastConnect 20ms + slowConnect 100ms + verySlowConnect 200ms + + 0 ms means "if there is time". 10ms-20ms is smooth. 100ms is still ok. + Influences everything. Control Midi In Latency, playback cursor scrolling smoothnes etc. + + But not realtime. This is not the realtime loop. Converting midi into instrument sounds + or playing back sequenced midi data is not handled by this loop at all. + + Creating a non-qt class for the loop is an abstraction layer that enables the engine to + work without modification for non-gui situations. In this case it will use its own loop, + like python async etc. + + A qt event loop needs the qt-app started. Otherwise it will not run. + We init the event loop outside of main but call start from the mainWindow. + """ + self.fastLoop = QtCore.QTimer() + self.slowLoop = QtCore.QTimer() + self.verySlowLoop = QtCore.QTimer() + + def fastConnect(self, function): + self.fastLoop.timeout.connect(function) + + def slowConnect(self, function): + self.slowLoop.timeout.connect(function) + + def verySlowConnect(self, function): + self.verySlowLoop.timeout.connect(function) + + def fastDisconnect(self, function): + """The function must be the exact instance that was registered""" + self.fastLoop.timeout.disconnect(function) + + def slowDisconnect(self, function): + """The function must be the exact instance that was registered""" + self.slowLoop.timeout.disconnect(function) + + def verySlowDisconnect(self, function): + """The function must be the exact instance that was registered""" + self.verySlowLoop.timeout.disconnect(function) + + def start(self): + """The event loop MUST be started after the Qt Application instance creation""" + logger.info("Starting fast qt event loop") + self.fastLoop.start(20) + logger.info("Starting slow qt event loop") + self.slowLoop.start(100) + logger.info("Starting very slow qt event loop") + self.verySlowLoop.start(200) + + def stop(self): + logger.info("Stopping fast qt event loop") + self.fastLoop.stop() + logger.info("Stopping slow qt event loop") + self.slowLoop.stop() + logger.info("Stopping very slow qt event loop") + self.verySlowLoop.stop() diff --git a/template/qtgui/mainwindow.py b/template/qtgui/mainwindow.py index 9e52197..370b014 100644 --- a/template/qtgui/mainwindow.py +++ b/template/qtgui/mainwindow.py @@ -40,7 +40,9 @@ from .menu import Menu from .resources import * from .about import About from .helper import setPaletteAndFont +from .eventloop import EventLoop from template.start import PATHS, qtApp + #Client modules from engine.config import * #imports METADATA import engine.api as api #This loads the engine and starts a session. @@ -48,80 +50,6 @@ from qtgui.designer.mainwindow import Ui_MainWindow #The MainWindow designer fil from qtgui.resources import * from qtgui.constantsAndConfigs import constantsAndConfigs -class EventLoop(object): - - def __init__(self): - """The loop for all things GUI and controlling the GUI (e.g. by a control midi in port) - - directConnect is 0ms (see below) - fastConnect 20ms - slowConnect 100ms - verySlowConnect 200ms - - 0 ms means "if there is time". 10ms-20ms is smooth. 100ms is still ok. - Influences everything. Control Midi In Latency, playback cursor scrolling smoothnes etc. - - But not realtime. This is not the realtime loop. Converting midi into instrument sounds - or playing back sequenced midi data is not handled by this loop at all. - - Creating a non-qt class for the loop is an abstraction layer that enables the engine to - work without modification for non-gui situations. In this case it will use its own loop, - like python async etc. - - A qt event loop needs the qt-app started. Otherwise it will not run. - We init the event loop outside of main but call start from the mainWindow. - """ - - self.directLoop = QtCore.QTimer() - self.fastLoop = QtCore.QTimer() - self.slowLoop = QtCore.QTimer() - self.verySlowLoop = QtCore.QTimer() - - def directConnect(self, function): - self.directLoop.timeout.connect(function) - - def fastConnect(self, function): - self.fastLoop.timeout.connect(function) - - def slowConnect(self, function): - self.slowLoop.timeout.connect(function) - - def verySlowConnect(self, function): - self.verySlowLoop.timeout.connect(function) - - def fastDisconnect(self, function): - """The function must be the exact instance that was registered""" - self.fastLoop.timeout.disconnect(function) - - def slowDisconnect(self, function): - """The function must be the exact instance that was registered""" - self.slowLoop.timeout.disconnect(function) - - def verySlowDisconnect(self, function): - """The function must be the exact instance that was registered""" - self.verySlowLoop.timeout.disconnect(function) - - - def start(self): - """The event loop MUST be started after the Qt Application instance creation""" - logger.info("Starting direct qt event loop") - self.directLoop.start(0) - logger.info("Starting fast qt event loop") - self.fastLoop.start(20) - logger.info("Starting slow qt event loop") - self.slowLoop.start(100) - logger.info("Starting very slow qt event loop") - self.verySlowLoop.start(200) - - def stop(self): - logger.info("Stopping direct qt event loop") - self.directLoop.stop() - logger.info("Stopping fast qt event loop") - self.fastLoop.stop() - logger.info("Stopping slow qt event loop") - self.slowLoop.stop() - logger.info("Stopping very slow qt event loop") - self.verySlowLoop.stop() api.session.eventLoop = EventLoop() #QtCore.QCoreApplication.setAttribute(QtCore.Qt.AA_DontUseNativeMenuBar) #Force a real menu bar. Qt on wayland will not display it otherwise. diff --git a/template/qtgui/resources.py b/template/qtgui/resources.py index 0362086..ceab62f 100644 --- a/template/qtgui/resources.py +++ b/template/qtgui/resources.py @@ -3320,9 +3320,9 @@ qt_resource_data = b"\ \xd0\x25\x00\x00\x08\xda\x00\x04\xd6\x8d\x00\x00\x0a\xe0\x00\x04\ \xec\x30\x00\x00\x09\x0f\x00\x04\xf6\x35\x00\x00\x0b\x0b\x00\x05\ \x8b\xaf\x00\x00\x09\xaa\x00\x05\x98\xc5\x00\x00\x09\xeb\x00\x05\ -\xc4\xaf\x00\x00\x0a\x28\x00\x47\x96\xc4\x00\x00\x00\x00\x01\x7e\ -\x97\x89\x00\x00\x04\x21\x03\x18\xa4\x29\x00\x00\x09\x44\x03\x19\ -\x9b\xde\x00\x00\x06\x95\x05\x1c\x51\x99\x00\x00\x06\x18\x05\x6c\ +\xc4\xaf\x00\x00\x0a\x28\x00\x47\x96\xc4\x00\x00\x00\x00\x00\x51\ +\x4a\x6e\x00\x00\x06\x95\x01\x7e\x97\x89\x00\x00\x04\x21\x03\x18\ +\xa4\x29\x00\x00\x09\x44\x05\x1c\x51\x99\x00\x00\x06\x18\x05\x6c\ \xc7\x3c\x00\x00\x0a\x67\x05\x6c\xc7\x3c\x00\x00\x0b\x3e\x07\x48\ \xba\x0e\x00\x00\x02\xff\x0c\x3f\xa2\x40\x00\x00\x05\xc5\x0d\x09\ \xd2\x63\x00\x00\x08\x44\x0d\x6c\xeb\x9f\x00\x00\x02\xa3\x0f\xc9\ @@ -3443,7 +3443,7 @@ qt_resource_data = b"\ \x6d\x00\x70\x00\x66\x00\x6f\x00\x68\x00\x6c\x00\x65\x00\x6e\x00\ \x20\x00\x73\x00\x74\x00\x61\x00\x74\x00\x74\x00\x64\x00\x65\x00\ \x73\x00\x73\x00\x65\x00\x6e\x00\x20\x00\xfc\x00\x62\x00\x65\x00\ -\x72\x00\x20\x00\x41\x00\x72\x00\x67\x00\x6f\x00\x64\x00\x65\x00\ +\x72\x00\x20\x00\x41\x00\x67\x00\x6f\x00\x72\x00\x64\x00\x65\x00\ \x6a\x00\x6f\x00\x20\x00\x28\x00\x4e\x00\x65\x00\x77\x00\x20\x00\ \x53\x00\x65\x00\x73\x00\x73\x00\x69\x00\x6f\x00\x6e\x00\x20\x00\ \x4d\x00\x61\x00\x6e\x00\x61\x00\x67\x00\x65\x00\x72\x00\x29\x00\ @@ -3454,7 +3454,7 @@ qt_resource_data = b"\ \x6f\x75\x72\x20\x73\x65\x73\x73\x69\x6f\x6e\x20\x66\x69\x6c\x65\ \x73\x2e\x20\x49\x74\x20\x69\x73\x20\x72\x65\x63\x6f\x6d\x6d\x65\ \x6e\x64\x65\x64\x20\x74\x6f\x20\x73\x74\x61\x72\x74\x20\x74\x68\ -\x72\x6f\x75\x67\x68\x20\x41\x72\x67\x6f\x64\x65\x6a\x6f\x2f\x4e\ +\x72\x6f\x75\x67\x68\x20\x41\x67\x6f\x72\x64\x65\x6a\x6f\x2f\x4e\ \x65\x77\x20\x53\x65\x73\x73\x69\x6f\x6e\x20\x4d\x61\x6e\x61\x67\ \x65\x72\x20\x69\x6e\x73\x74\x65\x61\x64\x2e\x07\x00\x00\x00\x1e\ \x54\x65\x6d\x70\x6c\x61\x74\x65\x43\x68\x6f\x6f\x73\x65\x53\x65\ @@ -3523,14 +3523,14 @@ qt_resource_name = b"\ \x0d\xfc\x11\x13\ \x00\x74\ \x00\x72\x00\x61\x00\x6e\x00\x73\x00\x6c\x00\x61\x00\x74\x00\x69\x00\x6f\x00\x6e\x00\x73\ -\x00\x0b\ -\x09\xc1\xce\x26\ -\x00\x65\ -\x00\x75\x00\x74\x00\x65\x00\x72\x00\x70\x00\x65\x00\x2e\x00\x74\x00\x74\x00\x66\ \x00\x05\ \x00\x6f\xa6\x53\ \x00\x69\ \x00\x63\x00\x6f\x00\x6e\x00\x73\ +\x00\x0b\ +\x09\xc1\xce\x26\ +\x00\x65\ +\x00\x75\x00\x74\x00\x65\x00\x72\x00\x70\x00\x65\x00\x2e\x00\x74\x00\x74\x00\x66\ \x00\x0d\ \x0d\x4c\x02\x07\ \x00\x77\ @@ -3544,8 +3544,8 @@ qt_resource_name = b"\ qt_resource_struct_v1 = b"\ \x00\x00\x00\x00\x00\x02\x00\x00\x00\x01\x00\x00\x00\x01\ \x00\x00\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\ -\x00\x00\x00\x50\x00\x02\x00\x00\x00\x01\x00\x00\x00\x06\ -\x00\x00\x00\x34\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\ +\x00\x00\x00\x34\x00\x02\x00\x00\x00\x01\x00\x00\x00\x06\ +\x00\x00\x00\x44\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\ \x00\x00\x00\x16\x00\x02\x00\x00\x00\x01\x00\x00\x00\x05\ \x00\x00\x00\x80\x00\x00\x00\x00\x00\x01\x00\x00\xce\x32\ \x00\x00\x00\x60\x00\x00\x00\x00\x00\x01\x00\x00\xc6\xb4\ @@ -3556,16 +3556,16 @@ qt_resource_struct_v2 = b"\ \x00\x00\x00\x00\x00\x00\x00\x00\ \x00\x00\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\ \x00\x00\x00\x00\x00\x00\x00\x00\ -\x00\x00\x00\x50\x00\x02\x00\x00\x00\x01\x00\x00\x00\x06\ +\x00\x00\x00\x34\x00\x02\x00\x00\x00\x01\x00\x00\x00\x06\ \x00\x00\x00\x00\x00\x00\x00\x00\ -\x00\x00\x00\x34\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\ -\x00\x00\x01\x72\xce\x17\xcb\xdb\ +\x00\x00\x00\x44\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\ +\x00\x00\x01\x73\x80\x8b\x3f\x01\ \x00\x00\x00\x16\x00\x02\x00\x00\x00\x01\x00\x00\x00\x05\ \x00\x00\x00\x00\x00\x00\x00\x00\ \x00\x00\x00\x80\x00\x00\x00\x00\x00\x01\x00\x00\xce\x32\ -\x00\x00\x01\x72\xf1\xfa\xc2\xb1\ +\x00\x00\x01\x73\x80\x8c\x2c\x95\ \x00\x00\x00\x60\x00\x00\x00\x00\x00\x01\x00\x00\xc6\xb4\ -\x00\x00\x01\x72\xce\x17\xcb\xd8\ +\x00\x00\x01\x73\x80\x8b\x3e\xfe\ " qt_version = [int(v) for v in QtCore.qVersion().split('.')] diff --git a/template/qtgui/resources/translations/de.qm b/template/qtgui/resources/translations/de.qm index 7bb3f18..2ba84ab 100644 Binary files a/template/qtgui/resources/translations/de.qm and b/template/qtgui/resources/translations/de.qm differ diff --git a/template/qtgui/resources/translations/de.ts b/template/qtgui/resources/translations/de.ts index 78845c2..cbeb3ed 100644 --- a/template/qtgui/resources/translations/de.ts +++ b/template/qtgui/resources/translations/de.ts @@ -37,14 +37,14 @@ TemplateChooseSessionDirectory - + Choose Session Directory Sessionverzeichnis wählen - Please choose a directory for your session files. It is recommended to start through Argodejo/New Session Manager instead. - Bitte wählen Sie ein Sessionverzeichnis. Darüberhinaus wird empfohlen stattdessen über Argodejo (New Session Manager) zu starten. + Please choose a directory for your session files. It is recommended to start through Agordejo/New Session Manager instead. + Bitte wählen Sie ein Sessionverzeichnis. Darüberhinaus wird empfohlen stattdessen über Agordejo (New Session Manager) zu starten. diff --git a/template/start.py b/template/start.py index ae99ce4..0953a05 100644 --- a/template/start.py +++ b/template/start.py @@ -44,7 +44,7 @@ nothing gets loaded. import argparse parser = argparse.ArgumentParser(description=f"""{METADATA["name"]} - Version {METADATA["version"]} - Copyright {METADATA["year"]} by {METADATA["author"]} - {METADATA["url"]}""") parser.add_argument("-v", "--version", action='version', version="{} {}".format(METADATA["name"], METADATA["version"])) -parser.add_argument("-s", "--save", action='store', dest="directory", help="Use this directory to save. Will be created or loaded from if already present. Deactivates Argodejo/New-Session-Manager support.") +parser.add_argument("-s", "--save", action='store', dest="directory", help="Use this directory to save. Will be created or loaded from if already present. Deactivates Agordejo/New-Session-Manager support.") parser.add_argument("-p", "--profiler", action='store_true', help="(Development) Run the python profiler and produce a .cprof file at quit. The name will appear in your STDOUT.") parser.add_argument("-m", "--mute", action='store_true', help="(Development) Use a fake cbox module, effectively deactivating midi and audio.") parser.add_argument("-V", "--verbose", action='store_true', help="(Development) Switch the logger to INFO and print out all kinds of information to get a high-level idea of what the program is doing.")