Sampled Instrument Player with static and monolithic design. All instruments are built-in.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 

122 lines
3.9 KiB

# Novation Nocturn driver
# Based on DWTFYW code by De Wet van Niekert (dewert). However, I had to
# put reading of the input endpoint in a separate thread because the only
# reliable way to read it is by using large timeouts (1s or so). With shorter
# timeouts, some events are lost/replaced by crossfader value.
import array
import binascii
import fcntl
import os
import usb.core
import usb.util
import sys
import time
import threading
class NocturnCommands:
def __init__(self):
self.pkt = ""
def setModeButtonLight(self, button, state):
self.pkt += chr(0x70 + button) + ('\x01' if state else '\x00')
def setUserButtonLight(self, button, state):
self.pkt += chr(0x78 + button) + ('\x01' if state else '\x00')
def setEncoderMode(self, encoder, mode):
self.pkt += chr(0x48 + encoder) + chr(mode << 4)
def setEncoderValue(self, encoder, value):
self.pkt += chr(0x40 + encoder) + chr(value)
def setSpeedDialMode(self, mode):
self.pkt += chr(0x51) + chr(mode << 4)
def setSpeedDialValue(self, value):
self.pkt += chr(0x50) + chr(value)
def clear(self):
for i in range(8):
self.setModeButtonLight(i, False)
self.setUserButtonLight(i, False)
if i & 1:
self.setEncoderMode(i, 3)
else:
self.setEncoderMode(i, 4)
self.setEncoderValue(i, 64)
self.setSpeedDialMode(5)
self.setSpeedDialValue(64)
class NocturnHandler(threading.Thread):
def __init__(self, n):
threading.Thread.__init__(self)
self.nocturn = n
self.rpipefd, self.wpipefd = os.pipe()
self.rpipe = os.fdopen(self.rpipefd, "rb")
self.wpipe = os.fdopen(self.wpipefd, "wb")
flags = fcntl.fcntl(self.rpipe, fcntl.F_GETFL)
fcntl.fcntl(self.rpipe, fcntl.F_SETFL, flags | os.O_NONBLOCK)
self.setDaemon(True)
def run(self):
while True:
pkt = self.nocturn.read()
if pkt is not None:
self.wpipe.write(pkt)
self.wpipe.flush()
def poll(self, handler):
try:
data = array.array('B', self.rpipe.read())
i = 0
# For longer sequences, Nocturn skips the control change message
while i < len(data):
if data[i] == 176:
i += 1
continue
handler(data[i], data[i + 1])
i += 2
except IOError as e:
pass
def get_poll_fd(self):
return self.rpipefd
class Nocturn:
vendorID = 0x1235
productID = 0x000a
def __init__(self):
dev = usb.core.find(idVendor=self.vendorID, idProduct=self.productID)
# The values in here don't seem to matter THAT much
initPackets=["b00000","28002b4a2c002e35","2a022c722e30"]
#This is a minimum set that enables the device, but then it doesn't
#really work reliably, at least the touch sensing
#initPackets=["b00000", "2800"]
if dev is None:
raise ValueError('Device not found')
sys.exit()
self.dev = dev
cfg = dev[1]
intf = cfg[(0,0)]
self.ep = intf[1]
self.ep2 = intf[0]
dev.set_configuration(2)
for packet in initPackets:
self.ep.write(binascii.unhexlify(packet))
self.reset()
self.reader = NocturnHandler(self)
self.reader.start()
def reset(self):
cmd = NocturnCommands()
cmd.clear()
self.execute(cmd)
def execute(self, cmd):
self.ep.write(cmd.pkt)
def read(self):
try:
data = self.ep2.read(8, None)
return buffer(data)
except usb.core.USBError as e:
return None
def poll(self, handler):
return self.reader.poll(handler)
def get_poll_fd(self):
return self.reader.get_poll_fd()